Linear 0.3A Speed Playback; Variable Speed Playback - Panasonic AJ-DCP Operating Instructions Manual

Operations
Linear 0.3a a speed playback
Pressing the SEARCH button when in play pause
status causes the mode to switch to slow still.
In this status, pressing the FF button or REW button
causes operation to switch to linear 0.3a playback.
Pressing the PAUSE/STILL button during linear 0.3a
playback causes the tape to pause.
Pressing the PAUSE/STILL button a second time
causes linear 0.3a playback to resume.
<Note>
O Noise appears during linear 0.3a speed playback.
VTR
Button pressed
operating mode
Play PAUSE/STILL
PAUSE/STILL or
PLAY
Play pause
SEARCH
PLAY
Slow still FF
REW
REW
Forward slow
SEARCH or
PAUSE/STILL
FF
Reverse slow
SEARCH or
PAUSE/STILL
PAUSE/STILL,
SEARCH or FF
Forward slow still
REW
PAUSE/STILL,
SEARCH or REW
Reverse slow still
FF
PLAY
All modes
STOP
STOP
All modes
STOP
Next VTR operation
Play pause
Play
Slow still
Play
Forward slow
Reverse slow
Reverse slow
Forward slow still
Forward slow
Reverse slow still
Forward slow
Reverse slow
Reverse slow
Forward slow
Play
Stop
Fast forward
FF
Rewind
REW

Variable speed playback

(When AJ-A95P is connected)
When the optional AJ-A95P remote controller is
connected to the REMOTE connector, variable speed
playback is enabled by operating the search dial on
the AJ-A95P.
<Notes>
O Noise appears on the screen during playback at
any tape speed except the normal tape speed (1a).
O During variable speed playback, the sound
recorded on the analog cue track is played back.
16