Table of Contents
Advertisement
Setup Menus
INTERFACE
Item
Superimposed
No.
display
202
ID SEL
The underlining denotes the factory mode.
TAPE PROTECT
Item
Superimposed
No.
display
400
STILL TIMER
401
SRC PROTECT
402
DRUM STDBY
403
STOP PROTECT
The underlining denotes the factory mode.
Setting
Superimposed
No.
display
For setting the ID information to be returned to the controller.
0000
OTHER
0: 20 25H is returned.
0001
DVCPRO
1: The ID (F0 33H) unique to the DVCPRO is returned.
0002
ORIG
2: The ID (A0 51H) unique to the unit is returned.
Setting
Superimposed
No.
display
0000
0.5S
For setting the time taken before the unit is set to the tape protection mode
0001
5S
when it has been left in the STOP or STILL mode.
0002
10S
(Unit: S = seconds, min: minutes)
0003
20S
0004
30S
0005
40S
0006
50S
0007
1min
0008
2min
For setting the tape protection mode operation when the unit has been left
in the STILL mode.
0000
STEP
0: STEP FWD
0001
HALF
1: STANDBY OFF (half loading)
<Note>
When STEP FWD has been set, the unit is automatically transferred to the
STANDBY OFF (half loading) mode when it has been left in the STILL
mode for a total of 30 minutes.
For setting the drum operation in the STANDBY OFF (half loading) mode.
0000
OFF
0: The drum stops rotating.
0001
ON
1: The drum continues to rotate.
For setting the tape protection mode operation when the unit has been left
in the STOP mode.
0000
STEP
0: STEP FWD
0001
HALF
1: STANDBY OFF (half loading)
<Note>
When STEP FWD has been set, the unit is automatically transferred to the
STANDBY OFF (half loading) mode when it has been left in the STOP
mode for a total of 30 minutes.
29
Description of setting
Description of setting
Advertisement
Table of Contents
