Exiting The Configuration Level - ABB ScreenMaster RVG200 Operating Instructions Manual

ScreenMaster RVG200
Paperless recorder

7.6 Exiting the configuration level

Referring to Fig. 7.7, exit the Configuration level as follows:
a
From the main System Configuration menu, touch
b
To apply changes and begin using a configuration immediately, touch
The configuration is saved to internal memory with the filename
'<time> <date> <instrument tag>.cfg' and the recorder returns to the Operating level.
A warning is displayed if the configuration change will result in the creation of new data files. Touch
to accept the changes or
c
Touch to export the current configuration to selected storage media – see
d
Touch to return to the Configuration level to continue configuring the recorder.
e
Touch to discard all changes and return to the Operating level.
Apply Changes
Export Configuration
Return to Configuration Mode
Discard Changes
5
Fig. 7.7 Exiting configuration mode
66
to reject them.
1
Configuration change
causes the internal
recording data files to
be recreated
Configuration change
does not cause the
internal recording data
files to be recreated
2
3
4
.
Changes saved
Internal Storage
SD Card
Front USB
Select the required
storage media
7 Configuration
– see on page 67.
Note 1
on page 67.
Note 2
Changes discarded
Please Wait
OI/RVG200-EN