Table of Contents
Advertisement
TELEPHONE:
FAX:
Important
Do not allow any spillage or cleaning material debris enter the large hole in the burner
base.
Figure 6
5. Replace burner head in aluminium bezel and ensure the head location pips sit within
burner base notches. When burner head is properly located, it will not rotate.
Figure 7
6. Light burner to check that it operates correctly.
Note:
Ensure that all parts are dried thoroughly prior to re-lighting.
Note:
This process should be followed prior to calling for a Service Engineer.
Failure due to lack of proper cleaning is not covered by warranty.
SERVICE (44) 01332 875665
SERVICE (44) 01332 875536
INSTRUCTION REF: IN151
ISSUE No.
2
DATE 10.02.04
Page 19 of 19
Advertisement
Table of Contents
