Rinnai Sapphire Operating Information And Installation Instructions page 2

FEATURES OF YOUR SAPPHIRE
24 MJ/h input, fan assisted, radiant convection space heater.
1.
3 step push button top mounted control for easy operation.
2.
Electronic automatic ignition.
3.
4. Large capacity fan to circulate warm air effectively.
5. Automatic fan control to turn the fan on and off and match the fan speed to the heat
output.
6.
Overheat switch to protect the unit should it become too hot.
7. Fan filter to protect the fan against dust and lint.
Flame failure device which cuts the gas off if the flame should be extinguished.
8.
9. Glass rod and Jewel Plaque burner design for maximum efficiency and good looks.
This heater must be installed correctly by an authorised person, and the installation must con-
form to local regulations.
The installation must also comply with the instructions supplied by Rinnai.
Service and removal must be carried out by an authorised person.
Full instructions Page 10.
Your Sapphire 24 has been approved by the Australian Electrical Authorities and the Australian
Gas Association.
A.G.A. Approval number 4988.
No parts or functions should be modified or permanently removed from the unit.
Please keep these instructions in a safe place for future reference.
24