Fixed Button (KX-T7730/KX-T7735)
Entering System Programming Mode
To enter system programming mode, the system password is required.
Note
means default value throughout these programming instructions.
5.2
Programming Procedures
Notes
•
•
•
The following are displayed when you store a number, such as a telephone number, or
feature number:
P: PAUSE; -: CONF; F: FLASH/RECALL; [ ]: INTERCOM
x: PAUSE (substitutes for any number [i.e., wild card])
•
To return to the previous programming item, press
•
To correct a wrong entry, press CLEAR and then enter the new input.
•
To delete a stored parameter, press CLEAR, enter the new input, and then press STORE.
•
Press
•
Some programmes cannot have a value left empty.
#
Administrator—for PT Programming
means default value throughout these programming instructions.
means to select "All" throughout these programming instructions.
or
to scroll the display.
System Password for
1234
Function
SELECT
FLASH
CLEAR
Programming No.
3 digits
.
Getting Started
23