Panasonic ADVANCED HYBRID KX-TEA308 Getting Started page 4

Advanced hybrid system
Hide thumbs Also See for ADVANCED HYBRID KX-TEA308:
Table of Contents

Advertisement

16.
Keep the unit away from heating appliances and devices that generate electrical noise such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the
performance of the PBX.
17.
This unit should be kept free of dust, moisture, high temperature (more than 40
vibration, and should not be exposed to direct sunlight.
18.
If you are having problems making calls to outside destinations, follow this procedure to test the
outside (CO) lines:
1.
Disconnect the PBX from all outside (CO) lines.
2.
Connect known working single line telephones (SLTs) to those outside (CO) lines.
3.
Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the outside (CO) line that
the SLT is connected to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX
to the outside (CO) lines until it has been serviced by an authorised Panasonic Factory Service
Centre.
19.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical
agents such as benzene or thinner.
For users in New Zealand only
This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service.
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in all respects with another
item of Telepermitted equipment of a different make or model, nor does it imply that any product
is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct operation at the higher
speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in
such circumstances.
Some parameters required for compliance with Telecom's Telepermit requirements are
dependent on the equipment (PBX) associated with this modem. In order to operate within the
limits for compliance with Telecom's Specifications, the associated PBX equipment shall be set
to ensure that modem calls are answered between 3 and 30 seconds of receipt of ringing.
IMPORTANT NOTICE
Under power failure conditions, the connected telephones may not operate. Please ensure that
a separate telephone, not dependent on local power, is available for emergency use.
For users in Australia only
No External TRC Terminal is provided due to an Internal Link between PE and TRC.
For users in Taiwan only
Lithium batteries can be found in the circuit boards of the main board and optional cards of the
PBX.
Notes
When disposing of any of the above products, all batteries must be removed. Follow the
applicable laws, regulations, and guidelines in your country/area regarding disposal of
batteries.
When replacing a battery, use only the same battery type, or an equivalent recommended
by the battery manufacturer.
4
Getting Started
˚C
) and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-teb308Kx-tea308

Table of Contents