Epson L1455 User Manual page 171

User's Guide
Code Problem
321 A DNS error has occurred.
322 An authentication error has occurred.
323 A communication error has occurred.
324 A file with the same name already exists in the
specified folder.
325 There is not enough storage space available in the
specified folder.
327 The memory is full.
328 The destination was wrong or the destination does
not exist.
331 A communication error occurred while acquiring the
destination list.
332 There is not enough storage space available to save
the scanned image in the destination storage.
333 The destination could not be found because the
destination information was uploaded to the server
before sending the scanned image.
334 An error occurred while sending the scanned image.
341 A communication error has occurred.
401 There is not enough storage space available to save
the data in the memory device.
Solving Problems
Solution
❏ Select Setup > System Administration > Wi-Fi/
Network Settings > Advanced Setup > DNS
Server, and then check the DNS settings.
❏ Check the DNS settings for the server, the
computer, or the access point.
Check the Location settings.
❏ Print a network connection report to check if the
printer is connected to the network.
❏ Check if the Location settings are correct. Access
the selected folder from a computer to check if it
is accessible.
❏ Check if communication is blocked by a Firewall.
❏ Delete the file with the same name.
❏ Change the file name prefix in File Settings.
❏ Increase the storage space in the specified folder.
❏ Reduce the number of documents.
❏ Lower the scanning resolution or increase the
compression ratio to reduce the size of the
scanned image.
Wait until other ongoing jobs are finished.
Check the Location settings.
❏ Print a network connection report to check if the
printer is connected to the network.
❏ Check if the printer is registered to the Epson
Connect services and a Destination List has been
created. See the Epson Connect portal website for
details.
https://www.epsonconnect.com/
http://www.epsonconnect.eu
Reduce the number of documents.
Select the destination again.
-
❏ Check the connections for the printer and the
computer. If you are connecting over a network,
print a network connection report to check if the
printer is connected to the network.
❏ Make sure that Epson Event Manager is installed
on the computer.
Increase the storage space in the memory device.
171
(Europe only)