Gold's Gym GGEL63908.0 User Manual page 7

3. The Console (4) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the screws, remove the battery
covers, insert the batteries into the battery com-
partments, and reattach the battery covers.
Make sure to orient the batteries as shown
by the diagrams inside the battery compart-
ments.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
4. While a second person holds the Console (4)
near the Upright (3), connect the console wires
to the Wire Harness (73) and to the Pulse
Wires (88).
Insert the excess wires downward into the
Upright (3).
Tip: Avoid pinching the wires. Attach the
Console (4) to the Upright (3) with four M4 x
19mm Screws (75).
3
Screws
Batteries
4
4
4
Console
Wires
7
Battery
Covers
Batteries
Avoid pinching
the wires
73
88
75
3