Optus DHR 4901 OPT User Manual page 42

Select USB Storage Device
For these functions to be available, your Set Top Box must have an external Hard
Disk Drive connected to the USB port located on rear or side panels. If no HDD is
connected, all functions will be grey and not selectable. You can select the following
device options:
• Device not connected
• Safely eject recording device
• Remount recording device
• Device 1
• Device 2
Recording Start Lead-time
The Recording Start Lead-time can be set between 0 and 29 minutes
Recording End Delay
The Recording End Delay can be set between 0 and 29 minutes
Time-shift length
The Time-shift length can be set between 5 and 120 minutes
Automatic time-shift
The Automatic time-shift can be activated or deactivated, ON / OFF.
Setup USB storage device
The USB storage device can be setup by selecting a connected storage device and
selecting a file format.
Format storage device
In this Sub-menu, you can see all information about your connected Hard-Disk-Drive
as well as an option to format the HDD. Information includes details about the HDD
Information file system, the total and the used capacity.
NOTE: By performing this task, when the formatting is complete, you will lose all
existing content on the Hard-Disk-Drive.
Check recording device
Connected Recording devices are checked for compatible formats.
Jump Forward
The Jump Forward time can be set 10, 20 or 30 minutes.
Jump Back
The Jump Back time can be set 10, 20 or 30 minutes.
Chain Record
Chain recording can be selected to record the current channel or all channels.
42