Additional Information - Optus DHR 4901 OPT User Manual

6.3 Additional information

Restoring Factory Defaults
Resetting to factory defaults can be useful if you have changed some settings
and lost some functions. Resetting will restore the decoder back to its original
configuration and you will lose all personalized settings.
To restore factory defaults:
1. Launch the Main Menu press the "MENU" key.
2. Use the arrow buttons to highlight Settings icon, press "OK".
3. Navigate to Installation, press "OK".
4. Enter your Installation PIN of 1234
5. Navigate to Factory Reset - Restore Default Settings press "OK" and select "YES"
to start the restore factory settings process.
Smart Card
The smart card is paired to this Set Top Box which means that the smart card
provided with your Set Top Box cannot be used in any other Set Top Box. Similarly you
will not be able to use any other card in your Set Top Box.
Reset Button
Reset function is provided by pressing the standby button on the side and holding it
for 4 seconds. This can be used to reset your Set Top Box in the case of a video freeze
for example. The Set Top Box will reboot after a few seconds and display "boot" on
the front panel while it starts up.
Analogue Interfaces
This STB does not support Analogue Video or Audio outputs, if your TV does not have
a digital HDMI interface an external converter will be required at an additional cost.
The type of converter required will depend on the analogue interfaces available on
your TV.
16