Optus DHR 4901 OPT User Manual page 18

Step 1
The "Remote Pairing" option automatically appears.
1. To start the pairing process press "OK" on the remote.
2. Initiate pairing by pressing and holding down the "Red" button.
3. The Pairing success status shall be displayed (Pass / Fail)
4. To Un-Pair Remote Control: Initiate un-pairing by pressing and holding down holding
down the "Blue" and "Pause" Buttons simultaneously for a period of approximately
3 to 8 seconds. The Remote control will return to the default IR mode.
Step 2
The next setting is the "Resolution".
Press "OK", then use the "▲▼" keys to select your relevant resolution for your TV,
and press "OK" to accept and proceed to next screen.
Standard Definition – 576
HD Ready – 720
High Definition – 1080
Step 3
The next setting is the "Display Format".
Press "OK", then use the "▲▼" keys to select your preferred display format for your
TV, press "OK" to accept and proceed to next screen.
18