Optus DHR 4901 OPT User Manual page 36

Settings - Installation
To perform any of the functions under "Installation" the user is required to enter their
PIN code before gaining access to these options.
Dish Installation
1. Dish Installation is the default-highlighted option when the entering Installation
sub-menu.
2. Press "OK" to open, the Dish Installation screen.
3. Select the correct Frequency, Symbol Rate, Polarity, Modulation and LNB type.
4. On completion of settings, press "Start scan".
5. The system starts the scan. Once the rescan has completed the results of all the
channels appear.
6. To go to previous menu, press "BACK" key or "EXIT" to go back full screen.
Factory Reset
Performing a Factory Reset will erase any personal settings and/or data.
The parental PIN code will change to the default of "1234".
To reset your decoder back to the factory defaults, carryout the following procedures.
1. Use the "▲▼" keys to scroll to Factory Reset.
To open, press "OK".
2. A confirmation banner appears with two options: "Yes" to reset to factory defaults
and reboot, or "No" to cancel this function.
36