Operation
To activate a pre-selected CLIP or DDI/MSN number
DPT/SLT
Off-hook.
To cancel an activation of a pre-selected CLIP or DDI/MSN number
DPT/SLT
Off-hook.
•
Up to 3 telephone numbers for each CLIP and DDI/MSN number can be stored per
extension.
•
You can store a CLIP and DDI/MSN number at any location (1-3) in any order. There is no
order of priority among 3 locations.
•
Even though a CLIP or DDI/MSN number is stored, this feature will not be enabled unless
you activate them.
•
This feature is automatically disabled on deleting stored CLIP or DDI/MSN numbers.
•
The Call Forwarding to CO Line (All Calls) can be set or cancelled from outside by Direct
Inward System Access (DISA) function. Also, it is possible through DISA to store/delete
CLIP and DDI/MSN numbers that are allowed to forward and to activate/cancel them. Refer
to 2.2.8 To Access Another Party Directly from Outside (Direct Inward System Access
[DISA]).
•
Call forward to outside line in accordance with pre-selected CLIP and DDI/MSN numbers
is not available when receiving a call from an analogue CO line. Even when a stored CLIP
or DDI/MSN number is activated, call forwarding to CO line (All Calls/No Answer) will
function according only to the setting as described in "Setting or cancelling the Call
Forwarding features" above.
112
7
1
9
1
1
Dial 7191.
7
1
9
0
Dial 7190.
1
CLIP
1
1
1
OR
TO
2
DDI/MSN
3
1
OR
0
All
Dial 1 to select CLIP or 2 to select
DDI/MSN, and then enter a location
number (1-3). To select All, dial 0.
1
1
1
1
CLIP
OR
TO
2
DDI/MSN
3
1
OR
0
All
Dial 1 to select CLIP or 2 to select
DDI/MSN, and then enter a location
number (1-3). To select All, dial 0.
C.Tone
On-hook.
C.Tone
On-hook.
User Manual