Panasonic KX-TA308 Operating Instructions Manual page 74

1.7 Useful Features
Checking and Selecting a message notification by the message receiver
If there is a message, the message waiting lamp (MESSAGE indicator) light will be on.
PT
When the telephone is idle and on-hook
Calling back the message notification sender
PT
Lift the handset or press
SP-PHONE/MONITOR.
• If you have more than one message at your extension,
the line connects you to the selected message sender.
Clearing all message notifications by the message receiver
PT
Lift the handset or press
SP-PHONE/MONITOR.
!
!
• Each extension can have a maximum of 8 simultaneous messages. If you try to set the ninth
PT
message, you will hear a reorder tone.
PT • If the MESSAGE indicator does not go out after calling the extension which left the
message, another message is waiting.
PT • If multiple message notifications are left at your extension, call back is executed in the order
received.
• If you select a specific message to call back, the other call backs will be executed in the
PT
order received, starting with the one selected.
(e.g.) 5
• 1.2 Proprietary Telephone Settings, "Customizing the Buttons on Your Telephone",
• See the Installation Manual, Section 3, "Message Waiting".
1-66
Operations
MESSAGE
Press MESSAGE repeatedly
until the desired message appears.
7
Dial 700.
Restoring the MESSAGE Button
• The stored messages are shown on the
display in the order they were received.
MESSAGE
Press MESSAGE.
0 0 #
Dial #.
• All messages are cleared.
Talk.
• The message is cleared after
the conversation.
Hang up or press
SP-PHONE/MONITOR.