Bticino classe 300 Installation Manual page 32

Classe 300
Installation Manual
Now it is possible to display some information concerning the configuration of the device
Back
7
Display:
A. The configuration parameters.
B. If the device has been set as apartment master or slave.
C. If an additional power sully is present.
D. The firmware version of the device.
E. If the Professional Studio (Office) function is active.
F. If the Answering machine function is active.
6. Press the End key to go to the home page, postponing the configuration to a later date.
7. Now touch to access the configuration section.
Back
Generals
Intercom
Camera
Actuation
10
8. Enter the N configurator values to set the address device and enter the P configurator values to
set the address of the EP of which you can open the Door Lock with IU idle, and to which you
can send the auto-on command.
9. Touch to make the functions available in the home page.
10. Proceed with the advanced configuration, see
Info
N P
00
00
Master/Slave Master
Power supply Disabled
Firmware ver. 1.0.12
Professional studio Enabled
Answering machine Enabled
Configuration
Configuration
00
Answering machine
Professional studio
9
configuration
32
End
6
8
00
P
section.
A
B
C
D
E
F