Before Requesting Help
Problem
The unit does not work.
The unit does not ring.
You cannot dial.
The other party suddenly
cannot hear your voice
during a conversation.
You cannot program items
such as the dialling mode.
You cannot store a phone
number in memory.
While programming, the
unit starts to ring and stops
the program.
30
Remedy
≥Check the settings (p. 6–12).
≥Remove the batteries and reinstall
them to reset the unit.
≥KX-T2375ALW is not designed to be
used with rotary (pulse dialling)
service.
≥The RINGER selector is set to OFF.
Set to HIGH or LOW (p. 11).
≥Dial lock mode is set. To cancel the
mode, see page 25.
≥The dialled number is restricted. To
cancel, see page 27.
(MUTE)
may have been pressed during
≥
the conversation. If "
(MUTE)
press
.
≥Programming is not possible when a
call is put on hold.
≥Do not pause for over 60 seconds
while programming.
≥Programming is not possible when a
call is put on hold.
≥Check that the batteries are installed in
the unit and that the battery power is
not low.
≥Do not enter a phone number more
than 22 digits long.
≥When using the Dial Lock (p. 25) or
Call Restriction feature (p. 26), you
cannot store a phone number in the
EMERGENCY button.
≥To answer the call, lift the handset or
(SP-PHONE/HEADSET)
press
again from the beginning after hanging
up.
" is displayed,
. Start