Samsung SF-76x series Service Manual page 82

4. Alignment and Troubleshooting
► Error Code
M2–1317
► Error message
Paper Jam inside machine
► Symptom
A paper jam was detected in the fuser unit area.
► Troubleshooting method
• If the machine supports fax.
1) Open the top cover. Remove the jammed paper.
2) Turn the machine off.
3) Turn the machine on while pushing the cancel button. Wait for rebooting the machine.
• If the machine not supports fax.
1) Open the top cover. Remove the jammed paper.
2) Entering Tech Mode : Menu # 1 9 3 4.
3) Select Data Setup.
4) Wrap Jam Clear
Select Yes
► Error Code
S2–4110
► Error message
Door open. Close it.
► Symptom
Top cover is open or the cover open switch is defective.
► Troubleshooting method
1) Check if the top cover is closed perfectly. Open and close it.
2) Remove the right cover. Check if the connection between the main board and SMPS/HVPS board is correct.
3) Check if the cover open switch on SMPS/HVPS board is operated properly. If it is defective, replace the
SMPS/HVPS board.
4-23
by Ok button, and the machine is rebooted after Error Clear.
Copyright© 1995-2011 SAMSUNG. All rights reserved.