Panasonic DBS 576HD User Manual page 46

2. Setting Up Your Phone
7. To set additional text messages, press the
HOLD
to move to the desired Reply Text Message.
8. Repeat steps 4-7 until all Reply Text Messages are entered.
AUTO PROG
9. Press to return to "81-User Maintenance" (step 1 above).
OR...
AUTO ON/OFF
Press
Voice Mail: Set Call-Forward ID Codes
To set the Call Forward ID code using either a large-
display or small-display phone:
1. Enter "User Maintenance" by pressing:
05 HOLD HOLD
2. Enter:
Extension Number
3. Dial the
Call Forward ID Code
4. Enter:
Notes:
• The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL key).
• To clear an entry or any existing data, press the FLASH key.
5. To set additional additional Call Forward ID Codes, press the
HOLD
or down arrow or
6. Repeat steps 4-5 until all SSD indexes are entered.
AUTO PROG
7. Press to return to "81-User Maintenance" (step 1 above).
OR...
AUTO ON/OFF
Press
Walking TRS Class of Service
To set Walking TRS codes using either a large-display or
small-display phone:
1. Enter "User Maintenance" by pressing:
08 HOLD HOLD
2. Enter: and press
46 DBS 576 (USA), issued October 2000
VOLUME
up or down key or press
to exit User Maintenance.
ON/OFF PROG * * CONF
.
HOLD
and press .
HOLD
and press to store the entry.
to move to the desired SSD.
to exit User Maintenance.
ON/OFF PROG * * CONF.
.
.
VOLUME
up
576-36-750