Panasonic DBS 576HD User Manual page 39

To set the Exception Day Modes using either a large-
display or small-display phone:
1. Enter "User Maintenance" by pressing:
07 HOLD
2. Enter: , press , enter:
Start Date by Month - two characters and Day - two
3. Enter:
characters
for Exception Period 1 and press
Note: To clear an entry or existing data, press the FLASH key.
4. To set additional Exception Day modes, press the
HOLD
arrow or to move to the desired mode.
5. Repeat steps 4-5 until the remaining days in the month are set.
AUTO PROG
6. Press to return to "81-User Maintenance" (step 1 above).
OR...
AUTO ON/OFF
Press
To set the Mode Schedule using either a large-display or
small-display phone:
1. Enter "User Maintenance" by pressing:
07 HOLD HOLD HOLD
2. Enter: , and press
Start Time in Hours (two characters) and Minutes
3. Enter:
(two characters)
for Pattern 1 - first mode and press
Notes: To clear an entry or existing data, press the FLASH key.
Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,
4. Enter:
2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2
store the entry.
Note: To clear an entry or existing data, press the FLASH key.
5. To set additional mode schedules, press the
HOLD
to move to the desired mode.
6. Repeat steps 3-5 until all patterns and modes are set. (There are 3 total patterns
with 5 start time/modes each.)
Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.
AUTO PROG
7. Press to return to "81-User Maintenance" (step 1 above).
OR...
AUTO ON/OFF
Press
576-36-750
2. Setting Up Your Phone
ON/OFF PROG * * CONF
2 HOLD HOLD
, and press
HOLD
to store the entry.
VOLUME
to exit User Maintenance.
ON/OFF PROG * * CONF
.
) and press
VOLUME
up or down arrow or
to exit User Maintenance.
DBS 576 (USA), issued October 2000
.
up or down
HOLD
.
HOLD
to
39