Asus B150I PRO GAMING User Manual page 56

CPU Graphics Switching Frequency [Auto]
This item affects the GT transient response speed and the component thermal production.
Select [Manual] to configure a higher frequency for a quicker transient response speed.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the CPU Graphics Switching Frequency to
[Manual].
Fixed CPU Graphics Switching Frequency (KHz) [250]
This item allows you to set a higher frequency for a quicker transient response speed.
Use the <+> and <‑> keys to adjust the value. The values range from 250KHz to
500KHz with a 50KHz interval.
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions
of every phase component.
[T. Probe]
[Extreme]
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Graphics Power Phase Control [Auto]
This item allows you to set the power phase control of GT. Configuration options: [Auto]
[Standard] [Optimized] [Extreme] [Power Phase Response]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
The following item appears only when you set the CPU Graphics Power Phase Control to
[Power Phase Response].
Power Phase Response [Fast]
This item allows you to set a faster power phase response. Select the ultra fast mode
for a faster power phase response. The reaction time will be longer when the regular
mode is selected. [Ultra Fast] [Fast] [Medium] [Regular]
2.5.10 Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and their features.
Intel SpeedStep
®
This item allows the operating system to dynamically adjust the processor voltage and cores
frequency, resulting to a decreased average power consumption and decreased average
heat production. Configuration options: [Auto] [Disabled] [Enabled]
2-20
Select to set the VRM thermal balance mode.
Select to set the VRM current balance mode.
[Auto]
TM
Chapter 2: BIOS Setup