HMR3000 User's Guide
4) Click the musical note button
5) Go to Serial Output tab and change the message rate on HPR sentence to 825.
Click on the attitude display button
Note: You should have received PC Demo Interface Ver. 2.03 or higher. If you have an older version please update to the
latest version. Please call Honeywell Magnetic Sensors Technical Support at 763-954-2474 if you need this new version
of the software.
Computer Requirements
Minimum:
Recommended:
Note: The Graphical output of the HMR3000 on PC Demo software may become sluggish if the PC has slow graphic
capability or if other applications are running in the background.
How to Set the Baud Rate
Using the PC DEMO software interface:
1) Connect the device and run PC Demo
2) Go to Tune Parameters / Serial Output page through the main menu of the program
3) Select the baud rate
4) Power down the device
5) Power up the device and communicate with the new baud rate
Through Direct Commands
1) Set up normal communications with the current baud rate
2) Issue the commands (see Section 4.4 of the User's Guide and Baud Rate)
3) Power down the device
4) Power up the device and communicate with the new baud rate
www.honeywell.com
PC 486/33MHz
Windows 3.1, Windows 95 or NT Operating System
VGA
2 Mb disk space (more for log file and captured data)
RS-232 serial port
Pentium/120MHz
Windows 95 or newer Operating System
SVGA 1024 x 768
Microsoft Excel (5.0 or greater) for capture and export of data (if desired)
3