Table of Contents
Advertisement
HMR3000 User's Guide
Packing List
Part Number
HMR3000-D00-232
HMR3000-D00-485
HMR3000-D21-232
HMR3000-D21-485
HMR3000-D21-232-DEMO
Factory Default Settings
Parameter or Condition
Baud Rate
Operation Mode
Output Sentences
TC1 (filter 1 time constant)
Heading filter L value
Heading filter S value
How to Set Up and Install HMR3000 Demo Unit Software
1) Connect the interface cable between the HMR3000 and serial port of a PC. Check and select the line voltage input
(110 or 220 V), turn the voltage selector to 9 volt DC mark with positive polarity, and plug in the adapter to an
electrical outlet.
2) Install PC Demo Interface software on the PC by running setup.exe from the CD. In Windows, click start,
then run and browse CD to find setup.exe in the HMR3000 PC DEMO folder.
3) Double click on PC Demo Interface icon (PCDEMO.EXE).
Select the correct COM port and 19200 baud rate (The serial port is usually COM1).
2
Items included
HMR3000 RS-232 Circuit Card
HMR3000 RS-485 Circuit Card
Housed Compass Module RS-232
Housed Compass Module RS-485
Housed Compass Module RS-232
Windows Demo Software CD
Power supply and interface cable
Default Settings
19200
Run
None
4
0
0
www.honeywell.com
Advertisement
Table of Contents
