Report Command Examples; Email Daily Report Commands - ZyXEL Communications nwa series Reference Manual

20.1.2 Report Command Examples

The following commands start collecting data, display the traffic reports, and stop collecting data.
Router# configure terminal
Router(config)# show report lan ip
No. IP Address
===================================================================
1 192.168.1.4
2 192.168.1.4
Router(config)# show report lan service
No. Port Service
====================================================================
1 21 ftp
2 21 ftp
Router(config)# show report lan url
No. Hit
=====================================================================
1 1
Router(config)# show report status
Report status: on
Collection period: 0 days 0 hours 0 minutes 18 seconds

20.2 Email Daily Report Commands

The following table identifies the values used in some of these commands. Other input values are
discussed with the corresponding commands.
Table 73 Input Values for Email Daily Report Commands
LABEL
e_mail
Use these commands to have the NWA/WAC e-mail you system statistics every day. You must use
the
configure terminal
commands.
Table 74 Email Daily Report Commands
COMMAND
show daily-report status
daily-report
[no] activate
smtp-address {ip | hostname}
[no] smtp-auth activate
smtp-auth username username password password Sets the username and password for SMTP
no smtp-address
no smtp-auth username
NWA/WAC Series CLI Reference Guide
User
admin
admin
Amount
1273(bytes)
711(bytes)
URL
140.114.79.60
DESCRIPTION
An e-mail address. You can use up to 80 alphanumeric characters, underscores (_),
periods (.), or dashes (-), and you must use the @ character.
command to enter the configuration mode before you can use these
Amount Direction
1273(bytes) Outgoing
711(bytes) Incoming
Direction
Outgoing
Incoming
DESCRIPTION
Displays the e-mail daily report settings.
Enter the daily report sub-command mode.
Turns daily e-mail reports on or off.
Sets the SMTP mail server IP address or domain
name.
Enables or disables SMTP authentication.
authentication.
Resets the SMTP mail server configuration.
Resets the authentication configuration.
Chapter 20 Reports and Reboot
117