Debug Log Commands - ZyXEL Communications nwa series Reference Manual

Chapter 19 Logs
19.1.2.1 System Log Command Examples
The following command displays the current status of the system log.
Router# configure terminal
Router(config)# show logging status system-log
18 events logged
suppression active
suppression interval: 10
category settings
user
built-in-service
system-monitoring : no
device-ha
interface
traffic-log
wlan
dhcp
capwap
wlan-rogueap
wlan-dcs

19.1.3 Debug Log Commands

This table lists the commands for the debug log settings.
Table 67 logging Commands: Debug Log Settings
COMMAND
show logging debug status
show logging debug entries [priority pri] [category
module_name] [srcip ip] [dstip ip] [service
service_name] [begin <1..1024> end <1..1024>]
[keyword keyword]
show logging debug entries field field [begin
<1..1024> end <1..1024>]
[no] logging debug suppression
[no] logging debug suppression interval <10..600>
clear logging debug buffer
This table lists the commands for the remote syslog server settings.
Table 68 logging Commands: Remote Syslog Server Settings
COMMAND
show logging status syslog
[no] logging syslog <1..4>
112
: yes
:
: normal , zysh
: normal , system
, connectivity-check: normal ,
: normal , pki
: normal , interface-statistics: no
: no , file-manage
: normal , daily-report
: normal , default
: normal , wlan-monitor
: normal , wlan-frame-capture: normal ,
: normal , wlan-load-balancing: normal ,
DESCRIPTION
Displays the current settings for the debug log.
Displays the selected entries in the debug log.
pri: alert | crit | debug | emerg | error | info | notice |
warn
keyword: You can use alphanumeric and
:=?!*#@$_%-
characters long.This searches the message, source,
destination, and notes fields.
Displays the selected fields in the debug log.
field: time | msg | src | dst | note | pri | cat | all
Enables log consolidation in the debug log. The
command disables log consolidation in the debug log.
Sets the log consolidation interval for the debug log. The
no
Clears the debug log.
DESCRIPTION
Displays the current settings for the remote servers.
Enables the specified remote server. The
disables the specified remote server.
: normal ,
: normal ,
: normal ,
,
: normal ,
: normal ,
: all ,
: normal ,
characters, and it can be up to 63
command sets the interval to ten.
NWA/WAC Series CLI Reference Guide
()+/
no
command
no