4-3-. Adjusting The Dvi Input Signals - Panasonic AV-HS400AE Operating Instructions Manual

4. Input/output signal settings
4-3-2. Adjusting the DVI input signals
Adjust the clock/phase and position of the DVI input signals.
1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2 Turn [F1] to display the DVIPhs sub menu.
<Menu display>
DVIPhs Signal
11/15 IN5
IN5-8
3 Turn [F] to select the input signal using the Signal item.
4 Turn [F3] to adjust the clock phase of the analogue input signals using the ClkPhs item.
While viewing the image quality, set the value at which the noise level is minimized.
5 Turn [F4] to adjust the horizontal position using the H-Pos item.
6 Turn [F] to adjust the vertical position using the V-Pos item.
ClkPhs H-Pos V-Pos
0 0
−16 −100
| |
+15 +100
0
−100
|
+100
68