Rear Panel - Panasonic AW-HB505 Operating Instructions Manual

REAR PANEL

CAMERA
CONTROL OUT
5
t 12V DC Input Connector [DC 12V IN]
(4-pin Cannon Connector)
Connect the AC Adaptor AW-PS505 (optional accesso-
ry).
y Pan/tilt Control Input Connector [TO CONTROL
PANEL, PAN/TILT HEAD, CONTOROL IN]
(RJ-45 8-pin Modular Jack)
Connect it to Pan/tilt Control Output Connector [P/T
CONTROL OUT] on the multi hybrid control panel with
a 10BASE-T straight cable (UTP category 5 or equiva-
lent), which may be extended up to 10 meters.
TO C A M E R A PA M / T I LT H E A D
VIDEO VIDEO VIDEO VIDEO
IN IN IN IN
PAM/TILT PAM/TILT PAM/TILT
CONTROL OUT CONTROL OUT CONTROL OUT
S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT
G/L G/L G/L G/L
OUT OUT OUT OUT
VIDEO OUT VIDEO OUT VIDEO OUT
CAMERA CAMERA CAMERA
CONTROL OUT CONTROL OUT CONTROL OUT
4 3 2
TO C O N T R O L PA N E L
PREVIEW OUT
VIDEO
IN
PAM/TILT PAM/TILT PAM/TILT
CONTROL OUT CONTROL OUT CONTROL IN
S-VIDEO OUT S-VIDEO OUT
G/L G/L
OUT IN
VIDEO OUT VIDEO OUT
CAMERA
CAMERA
CONTROL IN
CONTROL OUT
D C 1 2 V I N
1
S E E M A N U A L
u Preview Video Output Connector [TO CONTROL
PANEL, PREVIEW OUT] (BNC Connector)
Connect it to Preview Video Input Connector [PRE-
VIEW IN] on the Multi-Hybrid Control Panel with a
coaxial cable (5C-2V or equivalent).
allowable cable length is 10 meters.
i Genlock Input Connector [TO CONTROL PANEL,
G/L IN] (BNC Connector)
Connect it to the G/L Onput Connector [G/L OUT] on
the multi hybrid control panel with a coaxial cable (5C-
2V or equivalent) in operating the camera in external
sync mode. The cable can be extended up to 10
meters.
-6-
The maximum