To set up a Network Service filter:
1. From the navigation panel, go to Advanced Settings >
2. On the Enable Network Services Filter field, select Yes.
3. Select the Filter table type. Black List blocks the specified
4. Specify the day and time when the filters will be active.
5. To specify a Network Service to filter, enter the Source IP,
6. Click Apply.
0
Downloaded from
www.Manualslib.com
Firewall > Network Service Filter tab.
network services. White List limits access to only the specified
network services.
Destination IP, Port Range, and Protocol. Click the
manuals search engine
button.