Whyte 19 C, Cs, Race & Works - Whyte 801 Service Manual

WHYTE Service Manual
2.2.2: WHYTE 19 C, CS, RACE & WORKS
Frame Size X Small
Head Angle A 70.0°
Seat Angle B 73.5°
C
Top Tube 576.2mm
BB Height* D 311.5mm
Stand Over E 775mm
F 1077.5mm
Wheel Base
Chain Stay G 420mm
Seat Post H 30.9mm
Note:
Geometry shown here is 'Showroom' i.e. without rider aboard the bicycle. 'With Sag' geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø673mm tyres fitted (2.1" / 52-559)
2.2.3: WHYTE 801, 805 & 809
Extra
Frame Size X
Small
Head Angle A 68.5°
B
Seat Angle 74.0°
Top Tube C 561.5mm 583.8mm
BB Height* D 313.5mm 313.5mm
E 768mm
Stand Over
Wheel Base F 1073.9mm 1091.9mm
Chain Stay G 425mm
H
Seat Post 30.9mm 30.9mm
Note:
Geometry shown here is 'Showroom' i.e. without rider aboard the bicycle. 'With Sag' geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø677mm tyres fitted (2.25" / 54-559)
Page 6
Medium Large
70.0° 70.0°
73.5° 73.5°
600.9mm 614.0mm
311.5mm 311.5mm
794mm 818mm
1093.0mm 1107.9mm
420mm 420mm
30.9mm 30.9mm
Extra
Small Medium Large
Large
68.5° 68.5° 68.5° 68.5°
73.5° 73.5° 73.0° 73.0°
598.5m 617.8mm 628.8mm
313.5mm 313.5mm 313.5mm
773mm 797mm 824mm 844mm
1107.4mm 1122.2mm 1133.9mm
425mm 425mm 425mm 425mm
30.9mm 30.9mm 30.9mm
5.2: WHYTE 19 TRAIL ADJUSTABLE DROPOUT SYSTEM
Point
1 LH & RH Dropout Plate Pivot Area (Face Only)
2
LH & RH Dropout Plate Clamp Area (Face Only)
3
4
5.3: GENERAL WHYTE HARDTAIL MTB LUBRICATION
For the correct lubrication regime and maintenance of all parts on a Whyte hardtail bicycle,
please refer to the specific component manufacturers detailed instructions bundled with
this manual or for further information visit the specific manufacturers website.
2010 Edition 1 2010 Edition 1
WHYTE Service Manual
Fig.6: Whyte 19 Trail Dropout lubrication
Description
RH SS Plate Pivot Area (Face Only)
RH SS Plate Clamp Area (Face Only)
Lubricant Lubrication Interval
SKF Anti Fret Paste Check Once a Month
SKF Anti Fret Paste Check Once a Month
SKF Anti Fret Paste Check Once a Month
SKF Anti Fret Paste Check Once a Month
Page 15