Solve Problems; Maintenance; Continuous Inspections; Cleaning - walimex Daylight 150 Instruction Manual

5. Clean the device if necessary.
See Cleaning.
6. Demount standard reflector. See Mount/demount standard reflector
7. Put the device and all demounted elements in one carton and carry and
store them according to the requirements in the technical
specifications. See Technical specifications.
9.

Solve problems

Problem Possible reason
Device is Power cord is not plugged or
switched on, plugged incorrect
but has no
function
Lamp do not Lamp is switched off
light up
Lamp is not screwed in firmly
Problem
Lamp is defect
Possible reason
Remedy
Plug in the power
cord correctly
Switch lamp on, see
Screw lamp in and out
Screw the lamp more
firmly into the socket
Change lamp, see
Screw lamp in and out
Remedy
13

10. Maintenance

10.1 Continuous inspections

What you should do?
Check all cables and plugs for damages
In case of damage:
WARNING! Danger of electric shock and
fire through short-circuit. The device should
be repaired by an electrician immediately
Check, if the lamp is screwed in firmly
In case of damage:
WARNING! Danger of electric shock and
fire through short-circuit. The device should
be repaired by an electrician immediately

10.2 Cleaning

WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamps fall down.
Don´t touch the lamp with bare hands. Just touch the lamp at the plastic
socket or wear clean cotton gloves or use a clean cloth.
WARNING
Danger of electric shock
− The contact with moisture or water should be avoided.
− Unplug the power cord before cleaning the device.
ADVICE: Only use the following specified cleaning supplies.
Before
With every
every
change
operation
X
X
14