Change Lamp; Change Micro-Fuse; Accessories And Options; Spare Parts - walimex Daylight 150 Instruction Manual

Daylight 150 Cleaning
Use a microfiber cloth to remove light and stubborn
Housing
dirt
Wipe off with dust brush or dry, soft cloth
Lamp
ADVICE:
Don´t clean the lamps with water. Even small
residues on the lamps could lead to bursting

10.3 Change lamp

WARNING
Please just use lamps, which are conform with the required
specifications.
See Technical Specifications.
1. Screw lamp in and out.
See Screw lamp in and out.

10.4 Change micro-fuse

WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications,
doesn´t protect against the overloading of the device.
Please just use a micro-fuse, which is conform with the required
specifications. See Technical Specifications.
• Switch off device.
See Switch the device on and off.
• Disconnect from power supply:
Demount power cord.
• Open fuse holder:
Pull out the fuse holder carefully with a little screwdriver.
15
• Pull out the fuse holder completely out of the slot you're your hand.
• Take out the old micro-fuse.
• Slide the new micro-fuse in the holder.
• Slide the fuse holder carefully in the slot as far as it goes.

11. Accessories and options

You can find extensive accessories in our webshop.

12. Spare parts

Part of the device
Lamp (walimex Spiral Daylight Lamp 25 W)
Power Cord
Standard Reflector

13. Disposal and environment protection

Your device should be disposed free of charge at the local disposal points.

14. Technical specifications

Device
Power Supply
Weight
Vertical Pivoting Radius
Dimensions incl. Standard
Reflector (HxWxD)
Accessories
Item number
12803
12914
12912
AC 220 - 230 V / 50 Hz
approx. 1,3 kg
180 °
approx. 18 cm x 18 cm x 25 cm
Lamp, Standard Reflector, Instruction
16