Table of Contents
Advertisement
4.
Overview about the parts
A
Standard Reflector
B
Lamp
5.
Quick-start guide
ADVICE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Keep the sequences of the following operation steps when using the device
for the first time to avoid damages on the device.
A
B
C On/Off Tappet Switch
D Jack for Power Cord
C
E Fuse Holder
F Locking Screw for Tilt Angle
D
G Locking Screw for Lamp Tripod
E
F
G
9
WARNING
Please note the safety notes in the respective chapters throughout
operation.
• Mount the device on a tripod (optional).
• Mount/demount standard reflector.
• Screw in lamp.
• Adjust tilt angle.
• Connect to power supply.
• Switch device and lamp on/off.
6.
Preparation for operation
6.1
Mount on tripod (optional)
ADVICE:
Please note the user information of the tripod manufacturer.
WARNING
Select a tripod of suitable weight and dimensions. See Technical
Specifications.
Make sure, that the tripod with the mounted device has a tilt and skid
resistant stand.
1. Loose locking knurl.
2. Mount the device on the tripod.
3. Tighten locking knurl.
6.2
Mount/demount standard reflector
1. Mounting
You can mount the standard reflector
through the holder on the housing on
the bayonet connection. Turn the
reflector until it snaps into place.
Tighten the little screw.
10
Advertisement
Table of Contents
