RECEIVER SPECIFICATION
Power Requirements
120V or 230V AC adaptor with 2.1 mm female plug
Power Requirements
Signal/Noise Ratio
Border Upon Channel Rejection
Image & Spurious Rejection
Audio Output Level
Receiving Sensitivity
Dimensions
HAND-HELD TRANSMITTER SPECIFICATIONS
Power Requirements
Nominal Currant Drain
Modulation Type
RF Output
Max Deviation
Spurious Emission
Dimensions
BODY-PACK TRANSMITTER SPECIFICATIONS
Power Requirements
Nominal Current Drain
Modulation Type
RF Output
Max Devia tion
Spurious Emission
Dimensions
OPTIONAL ACCESSORIES
1/4" to 1/4" Cable (The Guitarst -UHF only)
1/4" to Miniature Connector
1.8 Meter (6 ft.) Receiver-Mixer Cable
11
13-15 V DC nominal, 500mA
MORE THAN 85dB
MORE THAN 70dB
MORE THAN 70dB
0- 300mV
-105dBm
394MM X 235MM X 55MM
1.5V AA battery X 2
LESS THAN 100mA
FM
MORE THAN 10dBm
70KHz
MORE THAN 55dB
238MM X 50MM X 50MM
250MM X 51MM X 51MM
1.5V AA battery X 2
LESS THAN 100mA
FM
MORE THAN 10dBm
70KHz
MORE THAN 55dB
100MM X 65MM X 30MM
Pyle PDWM4520 Wireless Microphone System, UHF Quad Channel Fixed
Frequency, 4 Handheld Microphones, Rack Mountable
UHF Band Receiver System
Quad Frequency Channel Design (Channel 1, 2, 3, 4)
Broad Frequency Response Range & Low Distortion
High Signal/Noise Ratio Performance
RF Signal & AF Signal LED Indicators
Radio Frequency and Audio Frequency
Independent Channel Adjustable Volume Controls
Detachable Dual Antennas
Rack Mountable System
Includes (4) Handheld Microphones
4 XLR Output Connector Jacks
System Receiver:
RF Frequency Range: 673 - 697.975MHz
Image & Spurious Rejection: >70dB
Receiving Sensitivity: -105dBm
Signal/Noise Ratio: >85dB
Border Upon Channel Rejection: >70dB
T.H.D.: <0.5%
Audio Output Level: 0-300mV
Power Requirements: 13-15V DC nominal 1000mA
Dimensions (L x W x H): 15.51'' x 9.25'' x 2.16''
Microphones:
RF Power Output: >10dBm
Modulation Type: FM
Max. Deviation: +/- 40kHz
Nominal Power Current: <40mA
Spurious Emission: >55dBc
Battery Powered: 2 x 'AA' Batteries (Included)
Batteries Included
Weight: 180g
12
Need help?
Do you have a question about the PDWM 4520 and is the answer not in the manual?