Actuator Fan Failure : #A2-1210. Call For Service If The Problem Persists; Actuator Fan Failure : #A2-2110. Call For Service If The Problem Persists; Actuator Sensor Failure #A3-3211: Call For Service If The Problem Persists; Actuator Sensor Failure #A3-3212: Call For Service If The Problem Persists - Samsung SL–C1860FW Service Manual

4. Alignment and Troubleshooting
► Error Code
A2-1210
A2-2110
► Error message

Actuator Fan Failure : #A2-1210. Call for service if the problem persists.

Actuator Fan Failure : #A2-2110. Call for service if the problem persists.

► Symptom
The SMPS fan or Fuser fan does no operate normally.
► Troubleshooting method
1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Remove the right cover.
3) Check if the connection between main board and the related fan is correct.
4) If the connection is OK, replace the defective fan.
► Error Code
A3–3211
A3–3212
► Error message

Actuator Sensor Failure #A3-3211: Call for service if the problem persists.

Actuator Sensor Failure #A3-3212: Call for service if the problem persists.

► Symptom
The inner temperature sensor is defective.
► Troubleshooting method
1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Enter the tech mode. Check the temperature sensor output.
3) If the sensor is defective, replace it.
4) If the temperature sensor is OK, replace the main board.
4-34 Copyright© 1995-2013 SAMSUNG. All rights reserved.