D-Link DAP-1860 User Manual page 41

Section 3 - Configuration
If Smart Connect disabled:
Status: Enable or disable this network by toggling this slider.
Wi-Fi Name This is the name of the DAP-1860's 2.4 GHz extended network. If using Wi-Fi,
(SSID): the DAP-1860 will rebroadcast the uplink router's Internet connection under
this SSID. You may also manually set the SSID of the extended network.
Password: Enter the password or network key that you wish to use for the extended
network.
Wi-Fi Select Auto or any channel from 1 to 13 for use with this network.
Channel:
Channel Select Auto 20/40 or 20 MHz for the bandwidth you wish this network to use.
Width:
HT20/40 Enable or disable HT20/40 coexistence by toggling the slider.
Coexistence:
Status:
Enable or disable this network by toggling this slider.
Wi-Fi Name This is the name of the DAP-1860's 5 GHz extended network. If using Wi-Fi,
(SSID):
the DAP-1860 will rebroadcast the uplink router's Internet connection under
this SSID. You may also manually set the SSID of the extended network.
Password:
Enter the password or network key that you wish to use for the extended
network.
Wi-Fi Select Auto or 36, 40, 44, 48, 149, 153, 157, 161, or 165 for use with this
Channel: network.
Channel Select Auto 20/40/80, Auto 20/40, or 20 MHz for the bandwidth you wish
Width: this network to use.
D-Link DAP-1860 User Manual
2.4 GHz Extended Wi-Fi
5 GHz Extended Wi-Fi
37