Network Settings - D-Link DAP-1860 User Manual

Table of Contents

Advertisement

Section 3 - Configuration
This page lets you configure the network settings for the DAP-1860. To access this page, click the Settings drop-down menu at the
top of the page, then select Network. Click Save at any time to save the changes you have made on this page.
Management
You can change the URL name of the device by editing the
Link:
text in the text box. If you change the name of the device,
you will need to enter http://xxxx.local./ (where "xxxx"
corresponds to the name of the device) in the address bar of
your web browser in order to access the configuration utility.
The Advanced Settings section of the Network Settings page allows you to configure both IPv4 and IPv6 settings that will be used
by the DAP-1860's extended network.
IPv4 Device Management Interface
My LAN
Here you can select whether you want the IP to have a
Connection is:
Dynamic IP or Static IP address. If you select Dynamic IP,
the options below will not be available.
IP Address:
Enter the Static IP address that you want to assign to the
extended network. This address should be outside of the
uplink router's DHCP address pool.
Subnet Mask:
Enter the subnet mask.
Gateway
Enter the gateway address. This is usually the IP address of
Address:
the uplink router.
Primary DNS
Enter the address of the primary DNS server.
Server:
Secondary
Enter the address of the secondary DNS server. This is
DNS Server:
optional but will provide backup if the primary server fails.
D-Link DAP-1860 User Manual

Network Settings

Advanced Settings
38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac2600

Table of Contents