Konica Minolta PagePro 9100 Repacking Manual page 7

3
Detach the mounting brackets from
the two locations on the back of the
printer.
4
Loosen and remove the screws in
front. (Use a coin to loosen the
screws.)
When deinstalling multiple optional
media trays, remove each using the
same procedure.
5
After loosening the screws, lift the
printer away from the optional media
tray(s).
WARNING!
Your printer weighs approximately 61.7 lbs (28 kg) without
consumables. Be sure to have help when lifting and moving it.
6
Replace any tape and packing
material.
7
If you are going to use the printer without the optional media tray(s),
reconnect the printer's interface cables.
8
Reconnect the power cord, and turn
on the printer.
" #
In compliance with UL guide-
lines, "The appliance inlet is
considered to be the main
disconnect device."
Deinstalling Accessories
5