How Do I Remove A 4-Bin Mailbox; How Do I Remove An Optional Media Tray - Konica Minolta PagePro 9100 Repacking Manual

How do I remove a 4-bin mailbox?

1
Turn off the printer.
2
Unplug the power supply cord and interface cable.
3
Remove the four mailbins (trays) from the 4-bin mailbox.
4
Disconnect the 4-bin mailbox cable
from the connector on the printer.
a
b
5
Press in the two buttons $
each side) at the back of the 4-bin
mailbox, and then lift the sorter up off
the transport unit %.
6
Remove the two screws securing the
transport unit, and then remove the
transport unit from the printer.
7
Return the stopper to its original
position.
8
Install the two brackets, the back
section of the top cover, and the
connector cover, removed during
installation of the 4-bin mailbox.
9
If you are going to use the printer without the 4-bin mailbox, reconnect the
printer's power supply cord and interface cable.

How do I remove an optional media tray?

1
Turn off the printer, and unplug the
power supply cord and interface
cable.
2
Remove the upper media tray.
4
Press $.
Unplug the connector %.
(one on
1
Deinstalling Accessories
1
2
2
1