Installation; Wall Mounting - Zanussi TC180W User Manual

INSTALLATION

POSITIONING
You can install this dryer in a number of different
ways. We will show you the most suitable of these.
Whichever way you install it, here are some points
to bear in mind:
• Always ensure that the dryer is level for optimum
functioning.
• The temperature in the room should not exceed
+35° C when the dryer is operating. If it does,
open a door or window while the dryer is on.
The dryer uses the air in the room for cooling.
• The area around the dryer should be as dust-
free as possible.
• If you install the dryer with its door hinge side
towards a wall, or next to a cupboard or wall unit
which is more than 370 mm deep, you will need
to leave a space on the hinge side at least 30
mm wide. This is to allow the door to open wide
enough for removing the water tank.
• Ensure the air ducts are not obstructed.
• The dryer must not be installed above a bath or
in a shower area.
CAUTION! The adjustable feet must
not be removed, they ensure that there
is adequate ventilation underneath the
dryer.
1.
670 mm
595 mm

WALL MOUNTING

Different wall materials require different types of
mounting hardware. Purchase mounting hardware
suited to the walls in your home. Use a minimum of
3 suitable fasteners to attach your mounting
console to the wall.
Before deciding on the wall mounting site, it is
important to check that the electrical lead will reach
the wall socket once the dryer is in place.
If you are installing the dryer between wall-mounted
cupboards, you should use the wall mounting
console. If the adjacent cupboards are more than
370 mm deep, don't forget to leave a space at least
30 mm wide on the left of the dryer so that the door
can open wide enough.
There should be a clear space at least 200 mm
high between the top of the dryer and the ceiling or
any cupboard above the dryer, to ensure adequate
ventilation at the top.
CAUTION! All electrical work
performed on the dryer should be
done by a qualified electrician or
competent person.
2.
13