Table of Contents
Advertisement
8. User Setting
8-1 User Setting Mode
• You can set the following items in the user setting mode:
No. 1. Operation mode setting
Select the operation mode (Maximum self-consumption mode / Programmed charge/discharge time mode / Back-
up mode) for the stand-alone system.
No. 2. Lower discharge limit setting
Set the lower battery discharge limit for the stand-alone system.
No. 3. Charging/discharging schedule setting
Set the charge start time/charge end time/discharge start time/discharge end time to be used in the Programmed
charge/discharge time mode for the stand-alone system.
No. 4 Daylight-saving time setting
Set the daylight-saving time setting to ON/OFF. Manual switching is required for a stand-alone system
* When linked with the network adaptor, the date/time setting is automatically updated by a server via the network adaptor.
The daylight-saving time setting will therefore be ignored.
No. 5 Child lock setting
Set the child lock setting to ON/OFF. When this option is set to ON, more complex key commands will be required
to start/stop the system operations in order to prevent failure caused by tampering.
• Press "MENU (ENTER)" for one second in the normal state to switch to the user setting mode.
• Press "CLOCK (▼)" or "DATA (▲)" to cycle through the setting items.
• Press "ON/OFF (CANCEL)" for one second to switch to the normal state.
Normal state
User setting mode (Item select)
Operation mode
1 sec
setting
* Make sure that
the system is
not in operation.
Lower discharge
limit setting
Charging/dis-
charging schedule
setting
Daylight-saving
time setting
1 sec
Child lock setting
15
Advertisement
Table of Contents
