Related Manuals for Panasonic WJ-HDB502
Summary of Contents for Panasonic WJ-HDB502
- Page 1 Network Board User’s Manual WJ-HDB502 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
-
Page 2: Table Of Contents
Sequence Setup (Multiscreen Monitor) ....26 Main Page and Control Window ......6 Sequence Setup (Spot Monitor) ......27 Multi Live Sequence Setting WJ-HDB502 BOARD SETUP ......... 7 (Multiscreen Monitor) ..........27 Quad Pattern Setup ..........28 WJ-HDB502 BOARD SETUP ........... 8 Spot Live Sequence Setting (Spot Monitor) ..... -
Page 3: Introduction
Introduction The WJ-HDB502 Network Board is an option for installation into the WJ-HD500 Digital Disk Recorder. The board enables the disk recorder to be accessed from a personal computer through a 10/100Base-T Ethernet. Browsing live and recorded images, and the relevant operations are available via remote input on the computer thanks to the adapted Internet protocols. -
Page 4: Preparations
SET UP OPERATE SEQUENCE /ESC COPY DISPLAY Digital Disk FULL DAYLIGHT SAVINGS Recorder WJ-HD Digital Disk Recorder Personal Computer (WJ-HDB502 mounted) • Connection to a Client PC via Hub Camera Ethernet Ethernet Straigth Straigth STOP PLAY/ PAUSE GROUP Cable Cable LOCK... -
Page 5: Network Setup Of The Wj-Hd500
Network Setup of the WJ-HD500 (2) Double-click Network. After the WJ-HDB502 Network Board is installed in the WJ- (3) In the Network dialog box, click the Configuration HD500 Digital Disk Recorder, confirm that the communica- tab. tion parameters are set correctly in the WJ-HD500 SETUP menu of the Disk Recorder. -
Page 6: Main Page And Control Window
Address set for WJ-HD500) /. The browser displays the MAIN CONTROL PANEL of the WJ-HDB502’s homepage shown in the figure. Note: Specify “http//:192.168.0.10/”, when a client PC is connected alone. Specify “http//: (IP address previously set for the WJ- HD500)/”... -
Page 7: Wj-Hdb502 Board Setup
WJ-HDB502 BOARD SETUP... -
Page 8: Wj-Hdb502 Board Setup
WJ-HDB502 BOARD SETUP The described below are setup the WJ-HDB502 Network 3. On the NETWORK SETUP window, clicking the dis- Board. plays shown below will display the following setup win- dow on the display. VIDEO MODE: Specifies the image quality and sequence for live video. -
Page 9: Video Mode Setup
4. Enter the host name. 3. Select an image quality for the images on the display Up to 8 alphanumeric characters can be set for the by clicking the pulldown list. name. SUPER FINE FINE QUAL NORMAL QUAL The factory default setting is HDB502. 5. -
Page 10: Alarm Notice Setup
Alarm Notice Setup 2. To delete the destination from the list. q Select a mail address by clicking the pulldown list. Clicking the [ALARM] button in the window, the ALARM w Click the [DELETE] button to execute the deletion SETUP window shown in the figure will appear on the dis- from the list. -
Page 11: Host Setup
User munication when the system is controlled with the PS.Data Setup. (Panasonic Security Data) mode. 1. Select either USE or NOT USE to enable or disable host authorization. 1. Enter a unit address (001 - 099) of the board for RS-485 The factory default setting is NOT USE. - Page 12 4. Select either 1 or 2 for the number of stop bits for RS- 485 communication by clicking the button. The factory default setting is 1 bit. 5. Select NONE, EVEN or ODD for parity bit for RS-485 communication by clicking the button. The factory default setting is NONE.
-
Page 13: Wj-Hd500 Setup
WJ-HD500 SETUP... -
Page 14: Wj-Hd500 Setup
WJ-HD500 SETUP When the WJ-HDB502 Network Board is installed in the WJ- Timer Setting HD500 Disk Recorder, it is enabled setup the WJ-HD500 The timer recording mode is triggered by the internal or an SETUP menu from the PC in the network external timer. -
Page 15: Common Recording Setup
RECORDING SETUP Common Recording Setup COLOR STD: Images are recorded with normal colors. B/W: Images are recorded in black-and-white. On the WJ-HD500 SETUP MENU window, click the COM- The factory default setting is COLOR STD. MON SETUP display in the window. The COMMON SETUP window shown in the figure will appear on the display screen. -
Page 16: Group Setup (Camera Assignment)
5. Select one of the modes by clicking the pulldown list. Group Setup (Title) The item lets you enable or disable uninterrupted This item lets you edit the group title to be displayed on the recording when the hard disk space is used up. monitor screen. -
Page 17: Manual Recording Setup
2. Select the recording time mode to be set by clicking the Manual Recording Setup pulldown list. The Disk Recorder can be recorded the images in Time The numeric indicates the hours for recording time Lapse recording when the REC button is pressed manually. mode: Manual Recording is disabled when the TIMER in the setup 2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480, 720,... -
Page 18: Alarm Recording (Manual Recording)
Alarm Recording Timer Recording Setup (Manual Recording) The Disk Recorder can record the images triggered by the internal timer. The internal timer comprises four event times These items let you set the recording mode in Time Lapse common to the recording groups, and is programmed in Recording when an alarm is activated during manual the setup. -
Page 19: Program Timer
3. Click the [More] button of the assigned program num- Program Timer ber (PROG1), the assigned program number window as The described below let you determine the program timer shown in the figure will appear on the display. schedule and recording mode. For further recording settings, refer to Program Timer Click the [More] button of the assigned program number detailed. -
Page 20: Special Day Timer
Special Day Timer Time Lapse Recording (Internal Timer) Click the TIMER SPECIAL DAY display in the underneath of the TIMER REC SETUP window will display the TIMER SPE- These items let you set the recording parameters for Time CIAL DAY SETUP window as shown in the figure. Lapse Recording assigned in the program number window. -
Page 21: Multi Shot Recording (Internal Timer)
2. If the parameter SP is selected for recording mode, 5. Select an alarm recording pattern by clicking the pull- select a recording rate by clicking the pulldown list. down list. 1 - 30fps: Records the selected number of the freeze OFF: Records the images assigned to the group inputs images every second. -
Page 22: One Shot Recording (Internal Timer)
0.5fps: Records a freeze image every 2 seconds. 6. Click the [SET] button to execute the selections. 0.4fps: Records a freeze image every 2.5 seconds. 0.3fps: Records a freeze image every 3.3 seconds. 7. Click the PROG SETUP display in the underneath of 0.2fps: Records a freeze image every 5 seconds. -
Page 23: Emergency Recording (Time Lapse Recording)
FINE: For fine image quality (Compression Rate 1/10) NORMAL: For normal image quality (Compression Rate 1/16) EXTENDED: For extended time recording quality (Compression Rate 1/25) The factory default setting is SUPER FINE. 3. Select a number of freeze images to be recorded by clicking the pulldown list. - Page 24 Select a recording image quality by clicking the pull- down list. SUPER FINE: For enhanced sharpness (Compression Rate 1/6) FINE: For fine image quality (Compression Rate 1/10) NORMAL: For normal image quality (Compression Rate 1/16) EXTENDED: For extended time recording quality (Compression Rate 1/25) 5.
-
Page 25: Multiplexer Setup
MULTIPLEXER SETUP These items let you determine functions such as sequence 7 to 16SCREEN: Selects a display with the assigned and power on status for this Disk Recorder. segment. 1. Click the MULTIPLEXER SETUP in the WJ-HD500 The factory default setting is QUAD-4A. SETUP MENU window. -
Page 26: Sequence Setup
Sequence Setup 2. Select either INT or EXT to advance the sequence by clicking the button. These items let you program the sequence pattern for the The item lets you select between internal and external Spot and Multiscreen Monitor. control for advancing the sequence on the Multiscreen Monitor. -
Page 27: Sequence Setup (Spot Monitor)
Sequence Setup (Spot Monitor) The described below let you program the sequence pattern for the Spot Monitor. Sequence Timing Setting This item lets you select between internal and external con- trol for advancing the sequence on the Spot Monitor. 1. Select either INT or EXT to advance the sequence by clicking the button. -
Page 28: Quad Pattern Setup
Quad Pattern Setup This item lets you select the pattern to be displayed on the Multiscreen Monitor when a 4-segment (Quad) display is selected in spot or sequence. The camera images can be assigned to the segments as shown in the figure. 1. -
Page 29: Alarm Setup
ALARM SETUP The described below let you determine functions such as The item lets you select the output duration of the alarm display and mode when an alarm is activated. signal from the ALARM port on the rear of the Disk Recorder. -
Page 30: Alarm Port Setting
The factory default setting is OFF. 4. Select the type of contact to meet the system require- Refer to the Video Motion Detector Setting for further ment in the INPUT editing area by clicking the pulldown detailed. list. 9. Select either SPOT or OFF by clicking the button. Normally Open: Accepts alarm input from Normally The item lets you select the mode for displaying an Open contacts. - Page 31 2. Select a sensitivity mode for a camera (1CH) by click- ing the pulldown list. OFF: Disables the motion detector function. LOW: Selects lower sensitivity. MID: Selects normal sensitivity. HIGH: Selects higher sensitivity. The factory default setting is OFF. 3. Repeat the above step to designate the other camera channels.
-
Page 32: Display Setup
DISPLAY SETUP The procedure described below let you determine the dis- OFF: Disables the display of the camera and group title play such as the camera title editing, display on and off and on the monitor screen. displays position on the monitors. The factory default setting is ON. -
Page 33: Camera Title Setup
The item lets you select the positions where the clock 2. Select a character corresponding to a camera by and status displays are placed on the Multiscreen pressing the keyboard. Monitor. The characters shown below can be entered in the TITLE column. -
Page 34: Communication Setup
System Controllers and the Disk Recorders The factory default setting is 1 bit. when the system is controlled with the PS.Data mode (Panasonic Security Data). 5. Select OFF, 100, 200, 400, 1 000 ms for the wait time by clicking the pulldown list. -
Page 35: Input (Camera) Number Setup
Input (Camera) Number Setup This item lets you assign numbers for the input from the system cameras for RS-485 communication. 1. Click the CAMERA NUMBER SETUP in the PS.Data SETUP window. The CAMERA NUMBER SETUP window as shown in the figure will appear on the display. -
Page 36: System Setup
SYSTEM SETUP The described below let you determine the system desig- Other System Setting nation and display the system logs. 1. Select a mode for time adjustment by clicking the pull- down list. 1. Click the SYSTEM SETUP in the WJ-HD500 SETUP This Disk Recorder has a time adjustment input/output MENU window. -
Page 37: Disk Management
Disk Management Error Report 1. Click the DISK MANAGEMENT in the SYSTEM SETUP There are 100 error records stored in chronological order in window. 10 pages of tables. The DISK MANAGEMENT window as shown in the fig- ure will appear on the display screen. 1. -
Page 38: System Operations
SYSTEM OPERATIONS... -
Page 39: Access Authorization
ACCESS AUTHORIZATION Control of Access Authorization Access Level User access authorization is controlled as follows. Three access levels can be assigned to control access by users. Unlimited access More than one user can be assigned the same access level. While device control commands are given top priority If neither user nor host authorization is used (set to NOT in the execution chain, there is no priority attached to the USE) in a network, all users may perform the following... -
Page 40: Control Of Access Authorization
User Setup Window A maximum of 16 users can be registered in the USER SETUP window. Enter a user name and password consisting of up to 16 alphanumeric characters (case sensitive). Select (mark) any of access levels 1 to 3. WJ-HD500 Authorized Functions Operation Request... -
Page 41: Controls And Operations
Start the WWW browser of your PC, in the URL (Uniform Resource Locators), type http:// (IP address previously set for the WJ- HD500) /. The browser displays the MAIN CONTROL PANEL of the WJ-HDB502’s homepage shown in the figure. q Camera Select button (CAMERA SELECT) -
Page 42: Monitoring Live Images
The sequence will be started from the camera images Basic Playback programmed previously. Refer to VIDEO MODE SETUP in the WJ-HDB502 setup 1. Clicking the [PLAY] button on the panel will play back for further detailed. the most recent recordings in the forward direction. -
Page 43: Recording Live Images
Forward or Backward search Search Record Function The recorded images can be searched playing back. The Disk Recorder has two search functions. During playback or playback pause, click the following The procedures below describe how to search and play buttons to search the recording. back records. -
Page 44: Search Record Function
List Display 4. Click the [PREV] or [NEXT] button on the panel to select next or previous 16 thumbnail. To play back the images in the list, follow the procedure shown below. 5. Select a recording number to be displayed by clicking the Recording Number Display on the panel. - Page 45 2. Click the ZOOM buttons to adjust the lens zoom. WIDE: Optically brings an object closer. TELE: Optically brings an object further. 3. Click the [FOCUS] buttons to adjust the lens focus. FAR: Sets the lens focus for further object. NEAR: Sets the lens focus for closer object.
- Page 46 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Panasonic Sales Company Regional Offices: Division of Matsushita Electricof Puerto Rico Inc.