Display Modes - Panasonic LJ-NA02 User Manual

Hide thumbs Also See for LJ-NA02:
Table of Contents

Advertisement

6. Display Modes
6-1 Normal State
• This product has the following three mode views:
mode.
• The
Normal state displays the operating status of the system (stopped, grid operation, back-up operation, etc.)
as well as error codes in the event of system problems.
• The
Remaining battery level displays the current remaining capacity of the storage battery.
• The
Operation mode view displays the currently selected operation mode (Maximum self-consumption mode /
Programmed charge/discharge time mode / Back-up mode).
• Press "DATA (▲)" to switch between the display modes.
*
Remaining battery level and
inactivity.
* The mode views can be switched while the system is operating or stopped.
Normal state
The following information is displayed in the normal state:
Stopped (Grid-connected)
Stopped (Back-up)
In operation (Grid-connected)
12
Operation mode views automatically return to the
Remaining battery level
Display of the status of battery
Depending upon the battery's
condition the battery might
not be able to be discharged
down to 0%.
Stopped via User's command.
If "ON/OFF (CANCEL)" is
pressed for one second,
the system will start the grid
operation.
Stopped via User's command.
"PF" will display.
If "ON/OFF (CANCEL)" is
pressed for one second, the
system will start the back-up
operation.
The system in grid operation
display indicates charge or
discharge power.
If "ON/OFF (CANCEL)" is
pressed for one second, the
system will stop.
Normal state,
Remaining battery level, and
SELF: Maximum self-consumption mode
ProG: Programmed charge/discharge time mode
bu: Back-up mode
rc: Remote control
Generation with
Inspection notice
In operation (Back-up)
Error
Normal state after five minutes of
Operation mode
System shows the Inspection
notice. Period until inspection
added.
(See 10-3)
The system in back-up
operation, indicates output
power and "PF".
If "ON/OFF (CANCEL)" is
pressed for one second, the
system will stop.
The system has abnormally
stopped and indicates error
mode (F/H/U/P/E) and code.
Operation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lj-sk84a

Table of Contents