Table of Contents
Advertisement
7-2 Date/Time Setting
• Press "CLOCK (▼)" for three seconds in the normal state to switch to the date/time setting mode.
• Each time you press "Menu (ENTER)", the active item will change in the order of year => month => day => hour =>
minute.
The active setting value blinks.
• Press "DATA (▲)" and "CLOCK (▼)" to change the value of the blinking digit.
• Set the minute and press "MENU (ENTER)" to complete the date/time setting.
• Once the date/time setting is complete, the set date/time data will be displayed in the order of year => month/day
=> hour/minute for two seconds each and then the normal display will be automatically returned to.
* This product uses the date/time data to control the charging/discharging and to fine-tune the storage battery.
Abnormal operations may result if the date/time is incorrect. Be sure to set the date/time accurately.
* If not linked with the network adaptor, an error may occur in the date/time data depending on the precision of the internal clock
of the storage battery system. Once a month, it is recommended that you confirm the time.
To maintain normal operations of the battery system, you are advised to check the date/time setting on a periodic basis.
* When linked with the network adaptor, the date/time setting is automatically updated by a server via the network adaptor.
* The product's time might deviate about 60 seconds per month. If this builds up, it will affect the electric bills.
Adjust the time in conjunction with checking the time once per month.
Normal state
Display of setting
14
3 sec
1 sec
Automatic
Date/Time setting
Year
Month
Day
Hour
Minute
* Press "DATA (▲)" and "CLOCK (▼)" to change the value.
Advertisement
Table of Contents
