Squeegee.spring.check/Replacement.(All.models,.With.aluminium.squeegee) - Clarke FOCUS II BOOST L20 Service Manual

ENGLISH
RECOVERY WATER SYSTEM
SQUEEGEE SPRING CHECK/REPLACEMENT (All models, with aluminium squeegee)
Check
1. Drive the machine on a level floor.
2. Turn.the.ignition.key.(80).to."0".
3. Check that the springs (A) and (B) push the squeegee (C) on the floor correctly.
4. If.necessary,.disassemble.and.replace.the.springs.according.to.the.following.procedure.
Disassembly
5. Remove.the.squeegee.(see.the.procedure.in.the.relevant.paragraph).
6. Lift.the.deck.by.pressing.the.pedal.(11).
7. Grasp.the.handlebar.(2).and.lower.the.front.part.of.the.machine.
8. Remove.the.cotter.pin.(D).
9. Disengage.the.end.(E).of.the.left.spring.(F).from.the.housing.(G).
10. Remove.the.left.spring.(F).
11. Repeat.steps.8,.9.and.10.for.the.right.spring.(H).
Assembly
12. Assemble.the.springs.by.performing.steps.5.to.11.in.the.reverse.order.
A
4
B
C
SERVICE MANUAL - FOCUS
F
D
E
II L17 - S20 - L20 - L20 Cyl. - BOOST
®
H
G
S301557
L20
®