Transferring Priority Of Temperature Selection - Rinnai infinity 20-2021 Customer Operation & Installation Manual

TRANSFERRING PRIORITY OF
TEMPERATURE SELECTION
n To Transfer priority of water
temperature selection to the
Master Control, simply press the
ITRANSFER 1 button on the
Master Control.
The ON indicator on the Master
Control will glow to indicate that
priority of water temperature
selection has been transferred
to the Master Control.
After having transferred the
priority of water temperature
selection, 42W will be displayed
on the Digital Monitor.
.
n The water temperature
can now be
selected using the Master Control.
Once the desired water
temperature is selected, the
Remote Control will store it in
the system memory until the
temperature is changed or the
mains power supply is turned off.
You can alternate priority of
water temperature selection
between the Master and Sub
Controls, without erasing the
individually stored temperatures
from the system memory.
n To Transfer priority of water
temperature selection back to
the Sub Control, simply press the
1st button again. The
temperature displayed will then
return to the temperature which
was previously selected at the Sub
Control, and the ON indicator will
glow to indicate priority control of
water temperature selection.
Master Control
-5-