Features - Rinnai infinity 20-2021 Customer Operation & Installation Manual

Continuous flow hot water system
Table of Contents

Advertisement

FEATURES OF YOUR INFINITY 20
n The Infinity 20 is one of the most advanced water heaters available. It supplies hot
water at the temperatures
selected on either of the two electronic Remote Controls
supplied
as standard with the appliance.
w The Master Control (larger control) can be fitted conveniently
close to the shower
or bath area, and is used to override the Sub Control (smaller control) which is
normally fitted in the kitchen or other convenient
area.
n The Transfer button on the Master Control enables you to select and lock the
preferred
temperature
for shower or bath water. When locked in, this selected
temperature
cannot be overridden
by the Sub Control.
n The Sub Control is used to select temperatures
for kitchen, laundry etc.
n Temperatures
selected at both Controls are retained in the system memory.
n The Infinity 20 never runs out. While the electricity,
gas and water supplies
are
connected,
hot water is available for as long as the hot water tap is open.
n The burner lights automatically
when the hot water tap is opened, and goes out
when the tap is closed.
n AGA's 5 Star Energy Rating makes the Infinity 20 one of the most efficient water
heaters available.
n The Infinity 20 is an externally mounted, power flued appliance. It is very compact,
saving both floor and wall space.
n Operating
noise levels are very low.
H Error codes are displayed
on the Remote Controls, assisting
with service.
H Other features include automatic frost protection
and over heat protection.
This Infinity 20 must be installed correctly by an authorised
person. The installation
of gas, water and electricity
must conform to local regulations.
The installation
must also comply with the instructions
supplied
by Rinnai.
Your Infinity20
has been approved byThe Australian Gas Association
andTheGas
Association
of New Zealand.
A.G.A. Approval Number 4673
G.A.N.Z. Approval Number 694
Please keep this instruction
booklet in a safe place for future reference.
All dimensions
referred to in these instructions
are in mm,
unless otherwise
specified.
-l--

Advertisement

Table of Contents
loading

Table of Contents