Remote Controls - Rinnai infinity 20-2021 Customer Operation & Installation Manual

Customers Opemting Infomtation
PLEASE READ THESE INSTRUCTIONS CAREFULLY
To obtain the best performance out of your Infinity 20 it is important to use the Remote
Controls correctly.
Used as intended, the Infinity 20 will supply hot water at the temperature selected,
even when the water flow is varied, or when more than one tap is used.
1
REMOTE CONTROLS ~~~ -1
The purpose of the Remote Controls is to enable you to have complete control over
your Infinity 20 from inside your house.
Two Remote Controls are supplied with the Infinity 20. The Master Control has a
Transfer button. This Control has the ability to override theSubControl and lock in the
water temperature selection desirable for shower and bathroom areas. It is suggested
that theMasterControl with theTransfer button beconvenientlyplaced nearthe shower,
bathroom area or other location where priority control of water temperature is required.
Normally, the Sub Control, without theTransfer button, would be located in the kitchen
or other convenient area, such as the laundry.
All necessary adjustments to the operation of your Infinity 20 can be made with either of
the two Remote Controls.
A different temperature can be stored in the system memory of each Control.
Various water temperatures can be selected in 16 steps from 35W to 75%. The
temperatures are 35-37-38-39-40-41-42-43-44-45-46-48-50-55-60-75OC.
Suggested temperatures are Shower 42OC
Kitchen 50°C.
These temperatures are suggested starting points for selection. You may find higher or
lower temperatures are more comfortable. Maintaining lower temperatures helps to
save energy
-2-