Table of Contents
Advertisement
Wipe with some washing-up liquid and a damp cloth. Always wipe parallel to the natural grain. Otherwise,
Stainless steel
you may scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin
fronts
(e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning
cloths. The stainless steel fronts can be polished using a special care product. Follow the manufacturer's
instructions. You can purchase special stainless steel cleaner from our after-sales service or from specialist
retailers.
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Enamel surfaces and
lacquered surfaces
Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and
Burners and steel
some hot water. Remove the burner cup and cap. Clean with a sponge and some hot water and washing-up
grid of the gas burn-
liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a
ers
small, soft brush. The gas burners only work properly when the igniters are clean. Remove food residue
from the burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must
not be allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or dam-
aged during cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup.
If the parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated
with black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function
of the burner. Replace the wire rack in the oven.
Electric hob (option) Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the
hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and
food residue immediately.
The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring
Metal ring of the
with the hard side of a scouring sponge and some liquid scouring agent. When doing so, make sure that
electric hob (option)
you do not scour the adjacent surfaces, as this could damage them.
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Knobs
Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These
Door glass
could scratch and damage the surface of the glass panel.
Wipe with a damp cloth. Dry with a soft cloth.
Seal
Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces.
Oven interior
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Glass cover on the
oven light
Soak in hot soapy water. Clean with a brush or a sponge.
Accessories
Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal sur-
Aluminium baking
faces with a knife or similar sharp object. Wipe the surfaces horizontally and without applying pressure with
tray (option)
soapy water and a soft window cloth or a lint-free microfibre cloth. Dry with a soft cloth. Do not use any
abrasive materials, scouring sponges or rough cleaning cloths. They could scratch the baking tray
If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic
Childproof lock
parts in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will
(option)
not work properly.
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Plinth drawer
(option)
Soak in hot soapy water. Clean with a brush or sponge.
Accessories
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
Hold the shelf frames from underneath and pull slightly
1.
forward. Pull the extension pins at the bottom of the rails out
of the mounting holes (Fig. A).
Then fold the rails upwards and carefully remove them
2.
(Fig. B).
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.
16
Installing the frames
Insert the two hooks carefully into the upper holes. (Figure A-
1.
B)
:
Incorrect assembly!
Never move the frame before the two hooks are fully
anchored in the upper holes. The enamel could be damaged
and may break (figure C).
Advertisement
Table of Contents
