Water Connection - Miele PW 5065 Operating Manual

Water connection

Cold water connection
A water faucet with
provided on-site. If none is available the
machine must be connected to a water
line by a qualified plumber.
The water pressure must be between
14.5 -145 psi (1 -10 bar). If the water
pressure is greater than 145 psi
(10 bar), a pressure reducer must be
installed. If the water pressure is below
15 psi (1 bar), there will not be enough
water available for a complete fill.
The cold water hose (blue mark) is
not suitable for a hot water
connection.
^ Connect the cold water intake hose
(blue mark) to the cold water valve.
^ Turn on the valve(s) and check for
leaks.
The water intake hoses are
equipped with screen filters. Do not
remove these filters except for
cleaning.
3
/ " threat must be
4
Maintenance
Replace the water hoses only with
genuine Miele hoses.
Extension hoses
Extension hoses (8' 2" or 13' [2.5 m or
4 m]) may be obtained from Miele.
Installation
49