Auto-Off - Philips DVT1300 User Manual

8.3.2 AUTO-OFF

The device switches off automatically if no key is pressed within a pre-set
period of time. This saves power.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select
Auto off
5
Press the record key g to confirm.
6
Press h / b to automatically turn the device off after
minutes of inactivity.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
Table of contents
.
, , or
5 15 30
8.3.3 Enabling/disabling key and signal tones
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select
5
Press the record key g to confirm.
6
Press h / b, to enable/disable the key and signal tones.
7
Press the record key g to confirm.
60
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
.
Device sounds
35
Settings